Since 1988

Brighton Electronics, Inc.

logo

Dimensions

Ordering
Guide

PANEL METER FEATURES

Snap-In Bezel

1/8 DIN Case

Window Mount

Bezel Mount

• Process output loop current from a transducer or transmitter
  (4-20mADC) can be displayed in engineering units.
  4 to 20mA DC output can be adjusted to display up to 0 to
  1999 counts. These meters display the engineering units
  from the loop current input adn do not require any external
  power.
• Shallow depth, only 1 inch.
• Loop drop only 2.2V DC (Optional 1.5V DC)
• Fully iintegrated process meter - no add-on or plug-in boards
• Snap-In Bezel panel meters reduce installation cost -
  no mounting hardware required
• Switch selectable SPANS for accurate & stable
  adjustment in engineering units.
• 25 turn SPAN adjustment for accurate calibration
• Switch selectable decimal ponits
• Space saver case requires 60% less panel space
  comparing with 1/8 DIN case
• Screw terminal connector
• Low power consumtion
• Display reading - User adjustable display range from
  0 to 100 counts up to 0 to 1999 counts with switch
  selectable SPANS and SPAN adjustment.Switch selectable
  offset with 25 turn OFFSET adjustment for wide - 20% to
  +60% of SPAN.

PANEL METER INPUT RANGES

 • 4-20mA DC

Specification

Panel Meter Mounting Types

non-backlight

negative green

positive green

positive red

negative red

negative blue

positive blue

BACKLIGHT OPTION

DPM Part No. Mounting Type Backlight Panel Meter Input Range Meter Power
SI640ADZ Window Non-Backlight 4-20mA DC Self Powered
SI740ADZ Bezel Non-Backlight 4-20mA DC Self Powered
SI940ADZ Snap-In Bezel Non-Backlight 4-20mA DC Self Powered
SID40ADZ 1/8 DIN Non-Backlight 4-20mA DC Self Powered
Brighton Home | About Us | Contact Us

Copyright © 2012 Brighton Electronics, Inc.

Loop Powered Input User Adjustable Panel Meters

3.5 Digit LOOP POWERED INPUT USER ADJUSTABLE PANEL METERS 
     ( Not all items are listed below. Please see the Ordering Guide for more information.)
aaaaaaaaaaaaiii